- Lengths
- 100 to 250 mm
- Sleeve gap
- 10 mm at end
- Thickness
- 1.5 to 2.5 mm
- Per box
- 250
Overview
Debonding sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie restrains the masonry against lateral wind loads, while the sleeve lets the masonry expand or contract.
Movement ties are held in the brick or block work, with the sleeve on the plain end. FERREX recommends installing the sleeve with a 10mm gap at the end to allow for expansion or contraction.
ApplicationVertical movement joints at columns.
Specifications
| Length (mm) | Width (mm) | Upstand (mm) | Thickness (mm) | Material | Qty per box |
|---|---|---|---|---|---|
| 100 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 125 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 150 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 175 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 200 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 225 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
| 250 | 20 up to 30 | 25/30 | 1.5/2.0/2.5 | Galvanised or stainless steel | 250 |
Other sizes available on request.
Source: Expanded Mesh & Metal Products catalogue, page 29 (PDF, opens in a new tab), Expanded Mesh & Metal Products catalogue, page 40 (PDF, opens in a new tab)
Installation
Materials and standards
- Manufactured to
- BS EN 845-1:2003 (formerly BS 1243)
- Pre-galvanised steel
- BS EN 10346:2009 (formerly BS EN 10142:1991), ASTM A653/A653M
- Stainless steel
- BS EN 10088-2:2005, grades 304, 316, 316L; ASTM A240/A240M
- Standards for wall ties (sheet)Frame cramps, movement ties, strip cavity ties, restraints
- Standards for wall ties (wire)Wire cavity ties
Standards are shown as listed in the FERREX catalogues. Request current test and compliance documents for your specification.
Available variants
- FLPSW
- L-plain tie, bolt/screw-on, with sleeves
- FPTSW
- Perforated special tie with sleeves
- FLPSW-ST
- L-plain slot tie with sleeves
- FFTSW
- Flat tie with sleeves
- FDBS
- Debonding sleeve
Downloads
Expanded Mesh & Metal Products
Related Products
All Expanded Metal & Accessories
Enquire About Movement Ties
Send the references, sizes and quantities your project needs.