- Lengths
- 75 to 250 mm
- Upstand
- 25, 30, 50 mm
- Thickness
- 1.5 to 3.0 mm
- Per box
- 250
Overview
Frame cramps restrain masonry to the structure. They can be fixed to a range of materials including concrete, steelwork and masonry.
A 6mm hole (as on FLPS) or 6 × 18mm slot (as on FLPT) in the standard 30mm upstand fixes the cramp to the vertical structure. The other end is embedded in the masonry. Other upstand heights are available on request.
ApplicationTying masonry to columns, walls and frames.
Specifications
| Length (mm) | Width (mm) | Upstand (mm) | Thickness (mm) | Material | Qty per box |
|---|---|---|---|---|---|
| 75 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 100 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 125 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 150 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 175 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 200 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 225 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
| 250 | 20 up to 50 | 25/30/50 | 1.5/2.0/2.5/3.0 | Galvanised or stainless steel | 250 |
Other sizes available on request.
Source: Expanded Mesh & Metal Products catalogue, page 28 (PDF, opens in a new tab), Expanded Mesh & Metal Products catalogue, page 40 (PDF, opens in a new tab)
Installation
Materials and standards
- Manufactured to
- BS EN 845-1:2003 (formerly BS 1243)
- Pre-galvanised steel
- BS EN 10346:2009 (formerly BS EN 10142:1991), ASTM A653/A653M
- Stainless steel
- BS EN 10088-2:2005, grades 304, 316, 316L; ASTM A240/A240M
- Standards for wall ties (sheet)Frame cramps, movement ties, strip cavity ties, restraints
- Standards for wall ties (wire)Wire cavity ties
Standards are shown as listed in the FERREX catalogues. Request current test and compliance documents for your specification.
Available variants
- FLSS
- L-bolt/screw-on, split end
- FLSS-ST
- L-slot tie, split end
- FLBT
- L-bolt tie, U-cut end
- FLST
- L-slot tie, U-cut end
- FLPS-S
- L-perforated special tie, bolt/screw-on
- FLPS-ST
- L-perforated special slot tie
- FCGWT
- Corrugated bolt screw-on wall tie
- FLSSF
- L-bolt screw-on safety tie
- FLSSB
- Bolt screw-on flat split-bend tie
- FLSSB-ST
- Slot flat split-bend tie
- FLPS
- L-plain bolt/screw-on tie
- FLPT
- L-plain slot tie
Downloads
Expanded Mesh & Metal Products
Related Products
All Expanded Metal & Accessories
Enquire About Frame Cramps
Send the references, sizes and quantities your project needs.