- Sheet
- 600 × 2500 mm
- Rib depth
- 10 mm
- Materials
- Galvanised, stainless
Overview
Rib lath is an expanded metal lath with integral stiffening ribs roll-formed during manufacture. The mesh areas between the ribs are expanded. It gives an excellent key for finishes on masonry walls, ceilings, suspended ceilings and stud partitions.
It is easy to handle, can be cut with hand shears and bent to the required angles.
ApplicationPlastering base on walls, ceilings and partitions.
- Galvanised for internal use, stainless steel for external use.
Specifications
| Reference | Width (mm) | Length (mm) | Rib depth (mm) | Weight | Material |
|---|---|---|---|---|---|
| FRL 1.4 | 600 | 2500 | 10 | 1.48 | Galvanised steel |
| FRL 1.8 | 600 | 2500 | 10 | 1.84 | Galvanised steel |
| FRL 2.2 | 600 | 2500 | 10 | 2.22 | Galvanised steel |
| FRL 1.4 S | 600 | 2500 | 10 | 1.48 | Stainless steel |
| FRL 1.8 S | 600 | 2500 | 10 | 1.84 | Stainless steel |
Other sizes available on request.
Source: Expanded Mesh & Metal Products catalogue, page 14 (PDF, opens in a new tab)
Installation
Materials and standards
- Manufactured to
- BS EN 13658-1 & 2:2005 (formerly BS 1369: Part 1:1987), ASTM C847
- Galvanised steel
- BS EN 10346:2009 (formerly BS EN 10142:1991), coating Z180 to Z275, ASTM A653/A653M
- Stainless steel
- BS EN 10088-2:2005, grades 304, 316, 316L; ASTM A240/A240M
- Standards for expanded metal lath and block meshSheet, strip, coil, corner and rib lath; block work mesh
- Standards for high Rib MeshFHRM L, M and H
Standards are shown as listed in the FERREX catalogues. Request current test and compliance documents for your specification.
Downloads
Expanded Mesh & Metal Products
Enquire About Rib Lath
Send the references, sizes and quantities your project needs.