- Wing widths
- 50, 75, 100 mm
- Weights
- 1.11, 1.61 kg/m²
- Lengths
- 2400, 2700, 3000 mm
- Per box
- 50
Overview
Corner lath is a jointless mesh, bent lengthwise along its centre, used in internal corner joints where the base materials differ. It reinforces internal lath corners to reduce cracking.
Formed from finished-edge strip lath and bent to 100° so it fits snugly into 90° corners. It is commonly used where walls meet walls or ceilings, and over internal angles of masonry.
ApplicationInternal corners.
- Galvanised for internal use, stainless steel for external use.
Specifications
| Reference | Wing width (mm) | Weight (kg/m²) | Length (mm) | Material | Qty per box |
|---|---|---|---|---|---|
| FCM M 50 | 50 | 1.11 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM M 75 | 75 | 1.11 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM M 100 | 100 | 1.11 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM H 50 | 50 | 1.61 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM H 75 | 75 | 1.61 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM H 100 | 100 | 1.61 | 2400/2700/3000 | Galvanised steel | 50 |
| FCM M 50 S | 50 | 1.11 | 2400/2700/3000 | Stainless steel | 50 |
| FCM M 75 S | 75 | 1.11 | 2400/2700/3000 | Stainless steel | 50 |
| FCM M 100 S | 100 | 1.11 | 2400/2700/3000 | Stainless steel | 50 |
| FCM H 50 S | 50 | 1.61 | 2400/2700/3000 | Stainless steel | 50 |
| FCM H 75 S | 75 | 1.61 | 2400/2700/3000 | Stainless steel | 50 |
| FCM H 100 S | 100 | 1.61 | 2400/2700/3000 | Stainless steel | 50 |
Other sizes available on request.
Source: Expanded Mesh & Metal Products catalogue, page 13 (PDF, opens in a new tab), Expanded Mesh & Metal Products catalogue, page 41 (PDF, opens in a new tab)
Installation
Materials and standards
- Manufactured to
- BS EN 13658-1 & 2:2005 (formerly BS 1369: Part 1:1987), ASTM C847
- Galvanised steel
- BS EN 10346:2009 (formerly BS EN 10142:1991), coating Z180 to Z275, ASTM A653/A653M
- Stainless steel
- BS EN 10088-2:2005, grades 304, 316, 316L; ASTM A240/A240M
- Standards for expanded metal lath and block meshSheet, strip, coil, corner and rib lath; block work mesh
- Standards for high Rib MeshFHRM L, M and H
Standards are shown as listed in the FERREX catalogues. Request current test and compliance documents for your specification.
Downloads
Expanded Mesh & Metal Products
Related Products
All Expanded Metal & Accessories
Enquire About Corner Mesh Lath
Send the references, sizes and quantities your project needs.