# FERREX > Metal Profiles and Expansion Products. FERREX drywall framing profiles, ceiling framing, aluminium ceiling systems, expanded metal, beads, blockwork reinforcement and wall ties for residential and commercial projects. Every product page lists references, dimensions, thickness, length, material and the source catalogue page. Specification tables are plain HTML. ## Drywall Framing Systems Galvanised steel profiles form the framework for gypsum-board partitions, with studs and tracks selected to suit the wall assembly. - [Drywall Framing Systems overview](https://www.ferrex.example/products/drywall-framing-systems/): installation guidance and standards for the range - [Stud](https://www.ferrex.example/products/drywall-framing-systems/stud/): Vertical framing members fitted into floor and ceiling tracks, with textured flanges to stop screws slipping during board fixing. (References: FS 46 to FS 198) - [Track](https://www.ferrex.example/products/drywall-framing-systems/track/): Floor and ceiling channels that receive the wall studs, chosen in width to suit the wall thickness. (References: FT 48 to FT 200) - [Deep Track](https://www.ferrex.example/products/drywall-framing-systems/deep-track/): Track with 32mm legs for partitions above 4.2m, or at the soffit where additional head depth is required. (References: FDT 48 to FDT 200) - [Extra Deep Track](https://www.ferrex.example/products/drywall-framing-systems/extra-deep-track/): Track with 50mm legs that accommodates movement of the floor beams or deck above an internal partition. (References: FEDT 48 to FEDT 200) ## Ceiling Framing Systems Metal framing components for suspended plasterboard ceilings in residential and commercial interiors, with space above for building services. - [Ceiling Framing Systems overview](https://www.ferrex.example/products/ceiling-framing-systems/): installation guidance and standards for the range - [Furring Channel](https://www.ferrex.example/products/ceiling-framing-systems/furring-channel/): Hat-shaped, corrosion-resistant framing for wall linings and ceiling assemblies. (Reference: FFC 35) - [Main Channel](https://www.ferrex.example/products/ceiling-framing-systems/main-channel/): Cold roll-formed, zinc-coated carrying channel that forms the primary member of a suspended ceiling framework. (References: FMC 38 A, FMC 38 B) - [Wall Angle](https://www.ferrex.example/products/ceiling-framing-systems/wall-angle/): Galvanised angle for framing junctions, soffits and perimeter fixing around walls and partitions. (References: FWA 25, 30, 50) - [Board Channel Plain](https://www.ferrex.example/products/ceiling-framing-systems/board-channel-plain/): Galvanised edge channel that gives exposed plasterboard ends a clean, defined finish. (Reference: FBCP 15) - [Board Channel Perforated](https://www.ferrex.example/products/ceiling-framing-systems/board-channel-perforated/): Edge protection for plasterboard with a perforated leg that takes jointing material. (Reference: FBC 15) - [Z-Trim](https://www.ferrex.example/products/ceiling-framing-systems/z-trim/): Holds rigid insulation in place and provides a face for fixing drywall, siding and other finishes. (References: FZT 20 A, FZT 25 B) - [Edge Trim](https://www.ferrex.example/products/ceiling-framing-systems/#edge-trim): Pre-coated aluminium perimeter trim listed with the concealed clip-in ceiling components. (Size: 15 × 38 × 15 mm) - [Spring Tee](https://www.ferrex.example/products/ceiling-framing-systems/#spring-tee): Galvanised concealed-grid tee that holds clip-in ceiling tiles. (Size: 35 × 30 mm) - [Tee Grid](https://www.ferrex.example/products/ceiling-framing-systems/tee-grid/): Main tees, cross tees and perimeter angles that form the exposed grid for lay-in ceiling tiles. (Main tee: 3600 mm) ## Aluminium Ceiling Systems FERREX aluminium ceiling systems combine ceiling tiles with compatible suspension grids, with clip-in and lay-in options. - [Aluminium Ceiling Systems overview](https://www.ferrex.example/products/aluminium-ceiling-systems/): installation guidance and standards for the range - [Clip-In Ceiling Tiles](https://www.ferrex.example/products/aluminium-ceiling-systems/clip-in-ceiling-tiles/): Tiles on a concealed Spring Tee grid for a continuous ceiling surface with downward access. (Sizes: 600 × 600, 600 × 1200 mm) - [Lay-In Ceiling Tiles](https://www.ferrex.example/products/aluminium-ceiling-systems/lay-in-ceiling-tiles/): Tiles supported by main and cross tees, lifting out for maintenance and replaceable one at a time. (Sizes: 600 × 600, 600 × 1200 mm) ## Expanded Metal & Accessories Metal reinforcement and finishing accessories for masonry, plastering and rendering, including mesh, beads, wall ties and associated components. - [Expanded Metal & Accessories overview](https://www.ferrex.example/products/expanded-metal-accessories/): installation guidance and standards for the range - [Angle Beads](https://www.ferrex.example/products/expanded-metal-accessories/angle-beads/): Form true, straight external corners that resist chips, cracks and impact damage. (Wing widths: 45 to 75 mm) - [Plaster Stop Beads](https://www.ferrex.example/products/expanded-metal-accessories/plaster-stop-beads/): Finish and reinforce plaster edges with a precise, straight stop. (Plaster depths: 10, 13, 16, 19 mm) - [Architrave Beads](https://www.ferrex.example/products/expanded-metal-accessories/architrave-beads/): Form a decorative channel gap at plaster edges around doors, windows and joinery. (Widths: 10 to 27 mm) - [Architrave Beads without Flange](https://www.ferrex.example/products/expanded-metal-accessories/architrave-beads-without-flange/): A shadow-line bead for a clean division between wall finishes. (Widths: 10 to 25 mm) - [Architrave Beads, Double Sided Mesh](https://www.ferrex.example/products/expanded-metal-accessories/architrave-beads-double-sided-mesh/): Mesh on both sides to form a decorative channel gap between two plastered surfaces. (Widths: 10 to 30 mm) - [Control Joint Beads](https://www.ferrex.example/products/expanded-metal-accessories/control-joint-beads/): Allow for expansion and contraction from initial render shrinkage and minor thermal movement. (Plaster depths: 13, 21 mm) - [Movement Beads](https://www.ferrex.example/products/expanded-metal-accessories/movement-beads/): Two plaster beads joined with PVC to absorb movement between surfaces and limit cracking. (Plaster depths: 10 to 19 mm) - [Render Stop Beads](https://www.ferrex.example/products/expanded-metal-accessories/render-stop-beads/): A neat lower edge to external render that helps protect masonry from run-off water. (Plaster depths: 13, 16, 19 mm) - [Micro Angle Beads](https://www.ferrex.example/products/expanded-metal-accessories/micro-angle-beads/): Fine-mesh corner beads for thin-coat plaster. (Width: 25 mm) - [Micro Plaster Stop Beads](https://www.ferrex.example/products/expanded-metal-accessories/micro-plaster-stop-beads/): Thin-coat edge protection that forms neat, flush frames at openings. (Plaster depth: 6 mm) - [Expanded Metal Lath](https://www.ferrex.example/products/expanded-metal-accessories/#expanded-metal-lath): A plastering base that reinforces against cracks and bonds dissimilar materials. (Width: Up to 1000 mm) - [Corner Mesh Lath](https://www.ferrex.example/products/expanded-metal-accessories/corner-mesh-lath/): Jointless mesh bent to 100° to reinforce internal corners and reduce corner cracking. (Wing widths: 50, 75, 100 mm) - [Sheet Lath](https://www.ferrex.example/products/expanded-metal-accessories/sheet-lath/): Expanded metal sheets for internal and external plastering, easily cut to follow curves. (Sheet size: 2500 × 600 mm) - [Strip Lath](https://www.ferrex.example/products/expanded-metal-accessories/strip-lath/): Flat, closed-diamond mesh strips that reinforce plaster over joints and stress points. (Sizes: 2500 × 150, 2500 × 200 mm) - [Rib Lath](https://www.ferrex.example/products/expanded-metal-accessories/rib-lath/): Expanded lath with integral roll-formed stiffening ribs, for masonry, ceilings and stud partitions. (Sheet: 600 × 2500 mm) - [Coil Lath](https://www.ferrex.example/products/expanded-metal-accessories/coil-lath/): Expanded lath supplied in coils, in widths to suit most wall constructions. (Coil widths: 100, 150, 200, 300 mm) - [High Rib Mesh](https://www.ferrex.example/products/expanded-metal-accessories/high-rib-mesh/): Expanded metal sheet used as permanent formwork, giving a strong key at construction joints. (Width: 445 mm) - [Block Work Mesh](https://www.ferrex.example/products/expanded-metal-accessories/block-work-mesh/): Expanded metal coil laid in mortar joints as anti-crack reinforcement for brick and block walls. (Coil widths: 75 to 300 mm) - [Ladder Reinforcement](https://www.ferrex.example/products/expanded-metal-accessories/ladder-reinforcement/): Continuous ladder-type joint reinforcement with cross rods spaced clear of the block cells. (Widths: 50 to 200 mm) - [Truss Reinforcement](https://www.ferrex.example/products/expanded-metal-accessories/truss-reinforcement/): Continuous truss-type joint reinforcement for single-wythe masonry walls. (Widths: 50 to 200 mm) - [Prefabricated Corners and Tees](https://www.ferrex.example/products/expanded-metal-accessories/prefabricated-corners-and-tees/): Ladder and truss reinforcement prefabricated as corners and tees for wall junctions. (Types: Ladder, truss) - [Frame Cramps](https://www.ferrex.example/products/expanded-metal-accessories/frame-cramps/): Restraints between masonry and the structure, fixable to concrete, steelwork and masonry. (Lengths: 75 to 250 mm) - [Movement Ties](https://www.ferrex.example/products/expanded-metal-accessories/movement-ties/): Wall ties with debonding sleeves that restrain masonry while allowing it to expand and contract. (Lengths: 100 to 250 mm) - [Cavity Wall Ties](https://www.ferrex.example/products/expanded-metal-accessories/cavity-wall-ties/): Strip and wire ties that hold the two leaves of a cavity wall together. (Types: Strip, wire) - [Overhead Restraints](https://www.ferrex.example/products/expanded-metal-accessories/overhead-restraints/): Sliding ties that restrain the head of free-standing walls while allowing vertical movement. (Width: 25, 35 mm) - [Anchor Plates](https://www.ferrex.example/products/expanded-metal-accessories/#anchor-plates): A simple, economical head restraint that attaches structural members to concrete. (Types: 9 anchor forms) - [Channels](https://www.ferrex.example/products/expanded-metal-accessories/channels/): Surface-fixed channels with sliding ties that restrain new masonry to existing steel or concrete. (Types: FOC, FDTT, FFTC, FWTRC) - [Dove Tail Anchor Channels](https://www.ferrex.example/products/expanded-metal-accessories/dove-tail-anchor-channels/): Cast-in channels that accept wire or strip ties to support masonry against concrete. (Channel: 25.4 × 25.4 mm) - [Partition Top Anchors](https://www.ferrex.example/products/expanded-metal-accessories/partition-top-anchors/): Give lateral restraint at the top of masonry walls while allowing the slab above to deflect. (Plate: 2.5 or 4 mm) - [Sliding Anchor Systems](https://www.ferrex.example/products/expanded-metal-accessories/sliding-anchor-systems/): A stem fixed to the structure above, with ties that slide to accommodate vertical movement of cavity walls. (Stem: 300 to 600 mm) - [Wall Ties Guide](https://www.ferrex.example/products/expanded-metal-accessories/#wall-ties-guide): Head, body and tail options that combine to suit a specific tie application. (Options: Head, body, tail) - [Channel Lintels](https://www.ferrex.example/products/expanded-metal-accessories/channel-lintels/): Lightweight galvanised steel channel lintels that support brickwork over openings. (Widths: 103 to 253 mm) - [Lintel Brackets](https://www.ferrex.example/products/expanded-metal-accessories/lintel-brackets/): Steel brackets that support channel lintels where there is no bearing wall. (Sizes: FLB100 to FLB250) - [Fibreglass Reinforcing Fabric](https://www.ferrex.example/products/expanded-metal-accessories/fibreglass-reinforcing-fabric/): Alkali-resistant woven glass mesh that reinforces plaster and prevents cracking. (Weights: 80 to 200 g/m²) ## Catalogues - [Drywall Partitions & Ceiling Systems (PDF, 20 pages)](https://www.ferrex.example/catalogues/FERREX-profiles-catalogue.pdf): Studs, tracks, furring and main channels, wall angles, board channels and Z-trims, with drywall design notes. - [Expanded Mesh & Metal Products (PDF, 48 pages)](https://www.ferrex.example/catalogues/FERREX-block-and-plasterring-accessories.pdf): Metal beads, metal lath, high rib mesh, blockwork reinforcement, lintels, wall ties and fibreglass fabric. - [Metal Ceiling Systems (PDF, 24 pages)](https://www.ferrex.example/catalogues/FERREX-ceiling-tiles-catalogue.pdf): Clip-in and lay-in tiles, concealed and exposed grid components, finishes, perforations and maintenance. ## Contact - Sales: sales@technicsfzc.com - General: info@technicsfzc.com - Telephone: +971 6 526 9175 - Address: Block 1H, Plot 09 & 10B, Hamriyah Free Zone, Phase 1, P.O. Box 49407, Sharjah, UAE - Hours: 8:00 am to 6:00 pm, Saturday to Thursday - [Enquiry form](https://www.ferrex.example/contact/)